FixVault
Home › Lexus › 2006 › RX 400h AWD › Repair and Diagnosis › Body & Frame › Door Locks › Door Lock › Door Control Switch › Inspection

Door Control Switch: Inspection

  1. INSPECT DOOR CONTROL SWITCH (PASSENGER SIDE) 
    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      TESTER CONNECTION AND SPECIFIED CONDITION

      Tester Connection Condition Specified Condition
      2 - 3 Lock Below 1 Ω
      2 - 3
      1 - 2      		 OFF (Free) 10 kΩ or higher
      1 - 2 Unlock Below 1 Ω
      Fig 1: Inspecting Door Control Switch (Passenger Side)
      G04115338Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT:

      If the result is not as specified, replace the switch.

    2. Apply battery voltage to the door control switch and check that the switch illuminates.

      OK 

      MEASUREMENT CONDITION AND SPECIFIED CONDITION

      Measurement Condition Specified Condition
      Battery positive (+) --> Terminal 4
      Battery negative (-) --> Terminal 2      		 Illuminates
      Fig 2: Identifying Switch Illuminating
      G04115339Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT:

      If the result is not as specified, replace the switch.

About FixVault