FixVault
Home › Lexus › 2007 › ES 350 › Repair and Diagnosis (Single Page) › Engine Performance › System › Engine Control System - System And Circuit Testing, Active Control Engine Mount System (Including DTC P16A0 - P16A4), On-Vehicle Inspection, Removal, Inspection & Installation › Active Control Engine Mount System › DTC Check/Clear

DTC Check/Clear

  1. CHECK DTC 
    1. Connect the intelligent tester to the DLC3.
    2. Turn the engine switch on (IG).
    3. Enter the following menus: DIAGNOSIS / OBD / MOBD / E-ACM / DTC INFO / CURRENT CODE.
    4. Check the DTCs on the tester screen.

      HINT:

      Refer to the intelligent tester operator's manual for further details.

  2. CLEAR DTC 
    1. Connect the intelligent tester to the DLC3.
      Fig 1: Connecting Intelligent Tester To DLC3
      G05247599Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Turn the engine switch on (IG).
    3. Erase the DTCs by following the prompts on the tester screen.
    4. Enter the following menus: DIAGNOSIS / OBD / MOBD / E-ACM / DTC INFO / CLEAR CODE.

      HINT:

      Refer to the intelligent tester operator's manual for further details.

About FixVault