FixVault

Data List / Active Test

  1. DATA LIST 

    HINT:

    Using the intelligent tester DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to shorten labor time.

    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
    2. Turn the engine switch on (IG).
    3. Enter the following menus: DIAGNOSIS / OBD/ MOBD / BODY or SMART / DATA LIST / DIAG & CUSTOMIZE.
    4. Read the DATA LIST according to the display on the tester.

      MAIN BODY (Main body ECU): 

      DATA LIST CHART

      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      WIRELESS OPER Wireless door lock control function / ON or OFF ON: Operating
      OFF: Not operating
      -
      HAZARD ANS BACK Hazard answer-back of wireless / ON or OFF ON: Operating
      OFF: Not operating
      -
      OPEN DOOR WARN Open door warning / ON or OFF ON: Operating
      OFF: Not operating
      -
      AUTO LOCK DELAY Automatic lock time / 60 s or 30 s 60 s: 60 seconds
      30 s: 30 seconds
      -
      UNLOCK/2OPER 2 times operation of wireless unlock / ON or OFF ON: All doors unlock when UNLOCK is pressed twice
      OFF: All doors unlock when UNLOCK is pressed once
      -
      TRUNK LID OPER Luggage compartment door open function type / 1 TIME/2 TIME/ 0.8 s PR/OFF 1 TIME: Luggage compartment door opens when LUGGAGE OPEN switch is pressed once
      2 TIME: Luggage compartment door opens when LUGGAGE OPEN switch is pressed twice
      0.8 s PR: Luggage compartment door opens when LUGGAGE
      OPEN switch is pressed and held down for 0.8 seconds
      OFF: Not operating
      -

      SMART (Certification ECU): 

      DATA LIST CHART

      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      ALARM FUNCTION Panic function / ON or OFF ON: Operating
      OFF: Not operating
      -
      WIRELS BUZZ VOL Wireless buzzer volume / LEVEL0 to LEVEL7 LEVEL7: Biggest volume
      LEVEL6
      LEVEL5
      LEVEL4
      LEVEL3
      LEVEL2
      LEVEL1 : Smallest volume
      LEVEL0: No sound
      -
  2. ACTIVE TEST 

    HINT:

    Performing the intelligent tester ACTIVE TEST allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to shorten the labor time. The DATA LIST can be displayed during the ACTIVE TEST.

    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
    2. Turn the engine switch on (IG).
    3. Enter the following menus: DIAGNOSIS / OBD/ MOBD / BODY or SMART / ACTIVE TEST.
    4. Perform the ACTIVE TEST according to the display on the tester.

      MAIN BODY (Main body ECU): 

      ACTIVE TEST CHART

      Tester Display Test Part Control Range Diagnostic Note
      HAZARD Turns the turn signal flasher relay ON/OFF Observe headlight and rear combination light for correct operation
      VEHICLE HORN Turns the vehicle horns ON/OFF -
      TRUNK/BDOR OPEN Turns the luggage compartment door opener motor ON/OFF Observe luggage compartment door

      SMART (Certification ECU): 

      ACTIVE TEST CHART

      Tester Display Test Part Control Range Diagnostic Note
      WIRELESS BUZZER Turns the wireless door lock buzzer ON/OFF -