FixVault
Home › Lexus › 2007 › ES 350 › Repair and Diagnosis › Body & Frame › Exterior/Interior Trim › Exterior › Name Plate › Installation

Name Plate: Installation

HINT:

When installing the symbol emblem or name plate, heat the vehicle body and symbol emblem or name plate using a heat light.

Heating temperature 

HEATING TEMPERATURE REFERENCE CHART

Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Symbol Emblem 20 to 30°C (68 to 86°F)
Name Plate 20 to 30°C (68 to 86°F)
NOTE: Do not heat the vehicle body and name plate excessively.
  1. INSTALL SYMBOL EMBLEM 
    1. Clean the vehicle body surface.
      1. Using a heat light, heat the vehicle body surface.
      2. Remove the double-sided tape from the vehicle body.
      3. Wipe off any tape adhesive residue with cleaner.
    2. Clean the symbol emblem. (If reusing the symbol emblem)
      1. Using a heat light, heat the symbol emblem.
      2. Remove the double-sided tape from the symbol emblem.
      3. Wipe off any tape adhesive residue with cleaner.
      4. Apply new double-sided tape to the symbol emblem.
    3. Install the symbol emblem.
      Fig 1: Identifying Location Of Pin
      G05254515Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Using a heat light, heat the vehicle body and symbol emblem.
      2. Remove the release paper from the symbol emblem.

        HINT:

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the symbol emblem.
  2. INSTALL NO. 7 LUGGAGE COMPARTMENT DOOR NAME PLATE 
    1. Clean the vehicle body surface.
      1. Using a heat light, heat the vehicle body surface.
      2. Remove the double-sided tape from the vehicle body.
      3. Wipe off any tape adhesive residue with cleaner.
    2. Clean the name plate. (If reusing the name plate)
      1. Using a heat light, heat the name plate.
      2. Remove the double-sided tape from the name plate.
      3. Wipe off any tape adhesive residue with cleaner.
      4. Apply new double-sided tape to the name plate.
    3. Install the name plate.
      Fig 2: Identifying Name Plate Dimension
      G05254516Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Using a heat light, heat the vehicle body and name plate.
      2. Remove the release paper from the name plate.

        HINT:

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the name plate.
  3. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE 
    1. Clean the vehicle body surface.
      1. Using a heat light, heat the vehicle body surface.
      2. Remove the double-sided tape from the vehicle body.
      3. Wipe off any tape adhesive residue with cleaner.
    2. Clean the name plate. (If reusing the name plate)
      1. Using a heat light, heat the name plate.
      2. Remove the double-sided tape from the name plate.
      3. Wipe off any tape adhesive residue with cleaner.
      4. Apply new double-sided tape to the name plate.
    3. Install the name plate.
      Fig 3: Identifying Name Plate Dimension
      G05254517Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Using a heat light, heat the vehicle body and name plate.
      2. Remove the release paper from the name plate.

        HINT:

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the name plate.
About FixVault