FixVault
Home › Lexus › 2007 › ES 350 › Repair and Diagnosis › Body & Frame › Seats › Seat › Front Power Seat Lumbar Switch › Installation

Front Power Seat Lumbar Switch: Installation

  1. INSTALL FRONT POWER SEAT LUMBAR SWITCH 
    1. Install the front power seat lumbar switch with the 2 screws.
    Fig 1: Identifying Screws And Front Power Seat Lumbar Switch
    G05253974Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY (See  INSTALLATION   ) 
  3. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB (See  INSTALLATION   ) 
  4. INSTALL RECLINING POWER SEAT SWITCH KNOB (See  INSTALLATION   ) 
  5. INSTALL FRONT SEAT ASSEMBLY (See  INSTALLATION   ) 
  6. INSTALL FRONT SEAT REAR OUTER TRACK BRACKET COVER (See  INSTALLATION   ) 
  7. INSTALL FRONT SEAT REAR INNER TRACK BRACKET COVER (See  INSTALLATION   ) 
  8. INSTALL FRONT SEAT OUTER TRACK BRACKET COVER (See  INSTALLATION   ) 
  9. INSTALL FRONT SEAT INNER TRACK BRACKET COVER (See  INSTALLATION   ) 
  10. INSTALL FRONT SEAT HEADREST ASSEMBLY 
  11. CONNECT FRONT SEAT OUTER BELT ASSEMBLY  (See INSTALLATION )
  12. INSTALL SEAT BELT ANCHOR COVER CAP  (See INSTALLATION )
  13. PERFORM INITIALIZATION 
    NOTE: Some systems need initialization after reconnecting the negative battery cable (See INITIALIZATION )
  14. INSTALL FRONT SEAT ASSEMBLY (See  INSTALLATION   ) 
  15. INSPECT SRS WARNING LIGHT 

    Check the SRS warning light. (See DIAGNOSIS SYSTEM )

About FixVault