Emission Control: Canister: Removal

HINT:

(See REMOVAL )

1. Disconnect the fuel tank vent hose from the charcoal canister.
   1. Push the connector deep inside.
   2. Pinch portion A.
   3. Pull out the connector.
      Fig 1: Locating Fuel Tank Vent Hose

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the charcoal canister filter sub-assembly from the charcoal canister.
   1. Push the connector deep inside.
   2. Pinch portion A.
   3. Pull out the connector.
3. Disconnect the vapor pressure sensor connector.
4. Disconnect the wire harness clamp.
5. Disconnect the purge line hose from the charcoal canister.
   Fig 2: Disconnecting Charcoal Canister Filter From Charcoal Canister

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. Remove the 2 bolts, clip and charcoal canister.
   Fig 3: Locating Bolts, Clip And Charcoal Canister

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002