Section 53 (Navigation System (Except Hybrid)): Multi-Display: Installation

WARNING: This page is about a different car, the 2007 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL NAVIGATION RECEIVER ASSEMBLY
1. Install the navigation receiver assembly as shown in the illustration.
  
  Fig 1: Identifying Navigation Receiver Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL RADIO NO. 2 BRACKET
1. Install the radio No. 2 bracket with the 5 bolts.
  
  Fig 2: Locating Radio No. 2 Bracket Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL RADIO NO. 1 BRACKET
1. Install the radio No. 1 bracket with the 5 bolts.
  
  Fig 3: Locating Radio No. 1 Bracket Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NAVIGATION RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY
1. Connect each connector.
2. Engage the 4 clips.
3. Install the navigation receiver with heater control panel assembly with the 4 bolts.
Fig 4: Identifying Navigation Receiver With Heater Control Panel Assembly
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY (See INSTALLATION )
INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (See INSTALLATION )
INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle) (See INSTALLATION )
INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Manual Transaxle) (See INSTALLATION )
INSTALL FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY (for Automatic Transaxle) (See INSTALLATION )
INSTALL UPPER CONSOLE PANEL (for Manual Transaxle) (See INSTALLATION )
INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH (See INSTALLATION )
INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH (See INSTALLATION )
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle) (See INSTALLATION )
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) (See INSTALLATION )
INSERT MAP DISC