FixVault
Home › Lexus › 2007 › ES 350 › Repair and Diagnosis › External Pages › Different car › Section 53 (Navigation System (Except Hybrid)) › Multi-Display › Removal

Section 53 (Navigation System (Except Hybrid)): Multi-Display: Removal

WARNING: This page is about a different car, the 2007 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.
  1. EJECT MAP DISC 
    1. Turn the ignition switch on (ACC).
    2. Push the "CLOSE" button.
    3. Touch "MAP EJECT" on the navigation screen to eject the map disc.
  2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle)  (See REMOVAL )
  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)  (See REMOVAL )
  4. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH  (See REMOVAL )
  5. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH  (See REMOVAL )
  6. REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY (for Automatic Transaxle)  (See REMOVAL )
  7. REMOVE UPPER CONSOLE PANEL (for Manual Transaxle)  (See REMOVAL )
  8. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle)  (See REMOVAL )
  9. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Manual Transaxle)  (See REMOVAL )
  10. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY  (See REMOVAL )
  11. REMOVE INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY  (See REMOVAL )
  12. REMOVE NAVIGATION RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY 
    1. Remove the 4 bolts.
    2. Pull the navigation receiver with heater control panel assembly toward the rear of the vehicle and disengage the 4 dips.
    3. Disconnect each connector and remove the navigation receiver with heater control panel assembly.
    Fig 1: Identifying Navigation Receiver With heater Control Panel Assembly
    G04980990Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. REMOVE RADIO NO. 1 BRACKET 
    1. Remove the 5 bolts and radio No. 1 bracket.
      Fig 2: Locating Radio No. 1 Bracket Bolts
      G04980991Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  14. REMOVE RADIO NO. 2 BRACKET 
    1. Remove the 5 bolts and radio No. 2 bracket.
      Fig 3: Locating Radio No. 2 Bracket Bolts
      G04980992Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  15. REMOVE NAVIGATION RECEIVER ASSEMBLY 
    1. Remove the navigation receiver assembly as shown in the illustration.
      Fig 4: Identifying Navigation Receiver Assembly
      G04980993Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault