Inspection Procedure

WARNING: This page is about a different car, the 2007 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.

CHECK CD
1. Check the CD.
  
  Fig 1: Cleaning Disc Surface With Soft Dry Cloth
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
OK: The CD is clean.

HINT:

If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

NOTE: Do not use a conventional record cleaner or antistatic preservative.

NG: CLEAN CD

OK
CHECK CD
1. Check that the CD is not deformed or cracked.
  
  Fig 2: Checking Disc For Deformed Or Cracked
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  OK: No deformation or cracks on the CD.
NG: CD IS FAULTY

OK: Go to Next Step
CHECK OPERATION OF ANOTHER CD
1. Check using another CD.
1. Check if the problem recurs using another CD.
  OK: The problem does not occur.
OK: CD IS FAULTY

NG: Go to Next Step
CHECK RADIO AND NAVIGATION ASSEMBLY
1. Check the radio and navigation assembly installation condition.
  1. Check that the radio and navigation assembly is properly installed.
    OK: Radio and navigation assembly is properly installed.
  NG: REINSTALL RADIO AND NAVIGATION ASSEMBLY
  
  OK: REPLACE RADIO AND NAVIGATION ASSEMBLY