Fuel Pump Resistor: Installation

INSTALL FUEL PUMP RESISTOR
1. Install the fuel pump resistor with the bolt.
  
  Fig 1: Identifying Fuel Pump Resistor With Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
2. Connect the 2 ground wires with the 2 bolts.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
3. Connect the connector with the clamp.
INSTALL ENGINE ROOM RH SIDE COVER (See INSTALLATION )
INSTALL COOL AIR INTAKE DUCT SEAL (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.