FixVault
Home › Lexus › 2007 › GS 350 AWD › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle - A760H › Valve Body Assembly › Removal

Valve Body Assembly: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. DRAIN AUTOMATIC TRANSMISSION FLUID (See  REMOVAL  ) 
  3. REMOVE EXHAUST PIPE NO.1 SUPPORT BRACKET SUB-ASSEMBLY (See  REMOVAL  ) 
  4. REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY (See  REMOVAL  ) 
  5. REMOVE VALVE BODY OIL STRAINER ASSEMBLY (See  INSPECTION  ) 
  6. DISCONNECT TRANSMISSION WIRE (See  INSPECTION  ) 
  7. REMOVE TRANSMISSION VALVE BODY ASSEMBLY 
    1. Remove the 20 bolts and valve body.
      Fig 1: Locating Valve Body Bolts
      G05294781Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Separate the lever pin from the manual valve.
      NOTE:
      • Do not remove the check ball and each piston.
      • Cover the valve body with a plastic bag, etc. to prevent dust or trash from intruding.
      Fig 2: Identifying Lever Pin And Manual Valve
      G05294782Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the check ball body and spring.
      NOTE: Do not drop the check ball body and spring.
    Fig 3: Identifying Check Ball Body And Spring
    G05294783Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault