Inspection Procedure
- PRESS "EJECT" AND CHECK OPERATION
- Press the DISC EJECT switch of the radio and navigation assembly for 5 seconds or more, and check that the disc ejects.
OK:
Disc ejects.
NG: PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN PROBLEM SYMPTOMS TABLE
OK: Go to next step
- Press the DISC EJECT switch of the radio and navigation assembly for 5 seconds or more, and check that the disc ejects.
- REPLACE DISC WITH ANOTHER AND RECHECK
- Replace the disc with a normal one and check that the disc ejects.
OK:
Disc ejects.
NG: PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN PROBLEM SYMPTOMS TABLE
OK: DISC IS FAULTY
- Replace the disc with a normal one and check that the disc ejects.