FixVault
Home › Lexus › 2007 › GS 430 › Repair and Diagnosis › Accessories & Equipment › Warning Systems › Park Assist/Monitoring › Intuitive Parking Assist System › Data List / Active Test

Data List / Active Test

  1. READ DATA LIST 
    1. Connect the intelligent tester to the DLC3.
    2. Turn the engine switch on (IG).
    3. Operate the intelligent tester according to the display and select "Data List".

    Clearance warning ECU: 

    DATA LIST

    Tester Display Measurement Item/Range Normal Condition Diagnostic Note
    MAIN SW Clearance sonar main switch / OFF or ON OFF: Clearance sonar main switch OFF
    ON: Clearance sonar main switch ON    		 -
    INITIAL SETTING Steering angle midpoint initial setting / DONE or NOT YET DONE: Initial learning operation is completed
    NOT YET: Initial learning operation is not complete    		 -
    CURRENT SETTING Steering angle midpoint current setting / SET or UNSET SET: Steering angle mid-point is completed
    UNSET: Steering angle mid-point not set    		 -
    ECU TYPE Type of clearance warning ECU / STEER or NORMAL NORMAL: Normal clearance sonar mode
    STEER: Steering sensing mode    		 -
    FL AREA COLOR Front left sensor detected area color / GREEN or YLW / RED GREEN: During avoidance low priority judgment
    YLW / RED: During collision/avoidance judgment    		 -
    FL SENS Front left sensor information / UNDTCT, LONG, M LONG, MIDDLE, CLOSE, FREEZE, OPEN or BLINK UNDTCT: Not detected
    LONG: Detected (long-range)
    M LONG: Detected (mid long-range)
    MIDDLE: Detected (medium-range)
    CLOSE: Detected (close-range)
    OPEN: Open (Open in sensor)
    FREEZE: Freeze (Sensor is frozen)
    BLINK: Blink (All displays blinking)    		 -
    FLC AREA COLOR Front left center sensor detected area color / GREEN or YLW / RED GREEN: During avoidance low priority judgment
    YLW / RED: During collision/avoidance judgment    		 -
    FL CENTER SENS Front left center sensor information / UNDTCT, LONG, M LONG, MIDDLE, CLOSE, FREEZE, OPEN or BLINK UNDTCT: Not detected
    LONG: Detected (long-range)
    M LONG: Detected (mid long-range)
    MIDDLE: Detected (medium-range)
    CLOSE: Detected (close-range)
    OPEN: Open (Open in sensor)
    FREEZE: Freeze (Sensor is frozen)
    BLINK: Blink (All displays blinking)    		 -
    FRC AREA COLOR Front right center sensor detected area color / GREEN or YLW / RED GREEN: During avoidance low priority judgment
    YLW / RED: During collision/ avoidance judgment    		 -
    FR CENTER SENS Front right center sensor information / UNDTCT, LONG, M LONG, MIDDLE, CLOSE, FREEZE, OPEN or BLINK UNDTCT: Not detected
    LONG: Detected (long-range)
    M LONG: Detected (mid long-range)
    MIDDLE: Detected (medium-range)
    CLOSE: Detected (close-range)
    OPEN: Open (Open in sensor)
    FREEZE: Freeze (Sensor is frozen)
    BLINK: Blink (All displays blinking)    		 -
    FR AREA COLOR Front right sensor detected area color / GREEN or YLW / RED GREEN: During avoidance low priority judgment
    YLW / RED: During collision/avoidance judgment    		 -
    FR SENS Front right sensor information / UNDTCT, LONG, M LONG, MIDDLE, CLOSE, FREEZE, OPEN or BLINK UNDTCT: Not detected
    LONG: Detected (long-range)
    M LONG: Detected (mid long-range)
    MIDDLE: Detected (medium-range)
    CLOSE: Detected (close-range)
    OPEN: Open (Open in sensor)
    FREEZE: Freeze (Sensor is frozen)
    BLINK: Blink (All displays blinking)    		 -
    RL AREA COLOR Rear left sensor detected area color / GREEN or YLW / RED GREEN: During avoidance low priority judgment
    YLW / RED: During collision/avoidance judgment    		 -
    RL SENS Rear left sensor information / UNDTCT, LONG, MIDDLE, CLOSE, FREEZE, OPEN or BLINK UNDTCT: Not detected
    LONG: Detected (long-range)
    M LONG: Detected (mid long-range)
    MIDDLE: Detected (medium-range)
    CLOSE: Detected (close-range)
    OPEN: Open (Open in sensor)
    FREEZE: Freeze (Sensor is frozen)
    BLINK: Blink (All displays blinking)    		 -
    RLC AREA COLOR Rear left center sensor detected area color / GREEN or YLW / RED GREEN: During avoidance low priority judgment
    YLW / RED: During collision/avoidance judgment    		 -
    RL CENTER SENS Rear left center sensor information / UNDTCT, LONG, MIDDLE, CLOSE, FREEZE, OPEN or BLINK UNDTCT: Not detected
    LONG: Detected (long-range)
    M LONG: Detected (mid long-range)
    MIDDLE: Detected (medium-range)
    CLOSE: Detected (close-range)
    OPEN: Open (Open in sensor)
    FREEZE: Freeze (Sensor is frozen)
    BLINK: Blink (All displays blinking)    		 -
    RRC AREA COLOR Rear right center sensor detected area color / GREEN or YLW / RED GREEN: During avoidance low priority judgment
    YLW / RED: During collision/avoidance judgment    		 -
    RR CENTER SENS Rear right center sensor information / UNDTCT, LONG, MIDDLE, CLOSE, FREEZE, OPEN or BLINK UNDTCT: Not detected
    LONG: Detected (long-range)
    M LONG: Detected (mid long-range)
    MIDDLE: Detected (medium-range)
    CLOSE: Detected (close-range)
    OPEN: Open (Open in sensor)
    FREEZE: Freeze (Sensor is frozen)
    BLINK: Blink (All displays blinking)    		 -
    RR AREA COLOR Rear right sensor detected area color / GREEN or YLW / RED GREEN: During avoidance low priority judgment
    YLW / RED: During collision/avoidance judgment    		 -
    RR SENS Rear right sensor information / UNDTCT, LONG, MIDDLE, CLOSE, FREEZE, OPEN or BLINK UNDTCT: Not detected
    LONG: Detected (long-range)
    M LONG: Detected (mid long-range)
    MIDDLE: Detected (medium-range)
    CLOSE: Detected (close-range)
    OPEN: Open (Open in sensor)
    FREEZE: Freeze (Sensor is frozen)
    BLINK: Blink (All displays blinking)    		 -
    FR BUZ RANGE Front buzzer onset range / NARROW or WIDE NARROW: 500 mm (19.69 in.)
    WIDE: 1,000 mm (39.37 in.)    		 -
    RR BUZ RANGE Rear buzzer onset range / NARROW or WIDE NARROW: 600 mm (23.62 in.)
    WIDE: 1,500 mm (59.06 in.)    		 -
    KEEP SENSE BUZ Keep sense status buzzer / NOT AVL or AVAIL NOT AVL: Buzzer sound stops in 3 sec.
    AVAIL: Buzzer sound does not stop    		 Buzzer can be stopped when an obstacle is at the same position for 3 sec. or more
    F & R BUZZER VOLM Front & rear buzzer volume / L, M1, M2, M3, or H - -
    SENSOR COND / N Sensor condition N range / NOT AVL or AVAIL NOT AVL: Sensors not available
    AVAIL: Sensors available    		 Sensor operation in N
    DISPLAY MODE Display mode /ALL, GUIDE or UNDISP ALL: All displays displayed
    GUIDE: Guide displayed
    UNDISP: Nothing displayed    		 -
    SONAR MODE Sonar mode / NORMAL, STEER or CUSTOM NORMAL: Normal clearance sonar mode
    STEER: Steering sensing mode
    CUSTOM: Customize mode    		 -

    Integration control and panel assembly 

    DATA LIST

    Tester Display Measurement Item/Range Normal Condition Diagnostic Note
    SONAR MAIN SW Clearance sonar main switch / OFF or ON OFF: Clearance sonar main switch OFF
    ON: Clearance sonar main switch ON    		 -
  2. PERFORM ACTIVE TEST 
    1. Connect the intelligent tester to the DLC3.
    2. Turn the engine switch on (IG).
    3. Following the display on the intelligent tester, perform the "Active Test".

    Clearance warning ECU: 

    ACTIVE TEST

    Tester Display Test Part Control Range
    FRONT BUZZER Front buzzer (Clearance warning buzzer) / STOP or OPERATE -
About FixVault