System Description

POWER DOOR LOCK CONTROL SYSTEM DESCRIPTION
1. The power door lock system locks / unlocks all doors.
  - The door control switch of the multiplex network master switch and the driver door key cylinder use the BEAN line to send lock / unlock request signals through the multiplex network master switch to the multiplex network body ECU.
  - The door control switch on the passenger door uses the BEAN line to send lock / unlock request signals through the multiplex network body ECU to the cowl side junction block RH ECU.
  - Upon receiving request signals, the multiplex network body ECU sends these signals to the door ECUs on each door using the BEAN. The door ECUs then lock / unlock each door.

FUNCTION OF MAIN COMPONENT

MAIN COMPONENT FUNCTION CHART

Components	Function
Multiplex network master switch assembly	Door control switch on multiplex network master switch locks / unlocks all doors
Door control switch assembly	Locks / unlocks all doors
Door courtesy light switch assembly	Turns on when door is open and off when door is closed. Outputs door status (open or closed) to multiplex network body ECU
Front door lock assembly LH	Built-in motor locks / unlocks door Built-in door control switch position (key-linked) detects door key cylinder (lock or unlock) and outputs data to front multiplex network door ECU LH Built-in position switch detected door status (locked or unlocked) and outputs data to front multiplex network door ECU LH. This switch turns off when door is locked and on when door is unlocked
Front door lock assembly RH, Rear door lock assembly LH, Rear door lock assembly RH	Built-in motor locks / unlocks door Built-in position switch detected door status (locked or unlocked) and outputs data to door ECU. This switch turns off when door is locked and on when door is unlocked
Front Multiplex Network Door ECU LH, RH Rear Multiplex Network Door ECU LH, RH	Receives lock / unlock request signal from multiplex network body ECU and locks / unlocks door

SYSTEM DESCRIPTION

The door control system has the following functions:

DOOR CONTROL SYSTEM DESCRIPTION

Function	Outline
Manual lock and unlock function	Locks / unlocks all doors by door control switch's lock operation (manual operation)
Key-linked lock and unlock function	Linked with door key cylinder Locks / unlocks all doors when lock/unlock operation is possible
Key lock-in prevention function	When door control transmitter is in vehicle, performing door lock operation with lock switch on outer handle will not lock door and will sound a buzzer
Collision door lock release	If SRS has been deployed and junction block ECU has detected signal that is output from airbag sensor, junction block ECU will unlock all doors
2-step unlock function*	Unlocks only driver side door by turning key cylinder once and unlocks other doors by turning it twice
Shift-linked automatic door lock	When conditions listed below are all met, this function causes all doors to automatically lock Engine switch on (IG) All doors are closed Shift lever is moved out of P Doors are unlocked
HINT: *: Default is OFF. (See CUSTOMIZE PARAMETERS )