Fuel Pump Resistor: Inspection: Installation
- INSTALL FUEL PUMP RESISTOR
- Install the fuel pump resistor and ground wire with the 3 bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
- Install the fuel pump resistor and ground wire with the 3 bolts
- INSTALL ENGINE ROOM SIDE COVER RH (See INSTALLATION )
- INSTALL COOL AIR INTAKE DUCT SEAL (See INSTALLATION )
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
- PERFORM INITIALIZATION
- Perform initialization (see
INITIALIZATION
).NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
- Perform initialization (see
INITIALIZATION
).