Inspection Procedure

Fig 1: Identifying W8 Junction Block And W4 Sensor Connector Terminals

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Disconnect the W4 sensor connector.
2. Disconnect the W8 junction block connector.
3. Measure the resistance of the wire harness side connectors.

   Standard resistance 

   TESTER CONNECTION SPECIFIED CONDITION
   
   

   Tester Connection	Specified Condition
   W4 - 1 (SIG) - W8 - 10 (IG2)	Below 1 Ω
   W4-2 (MPX) - W8-9 (MPX1)	Below 1 Ω
   W4-3 (ES) - W8 - 17 (GND2)	Below 1 Ω

NG: REPAIR OR REPLACE HARNESS OR CONNECTOR 

OK: REPLACE RAIN SENSOR