Millimeter Wave Radar Sensor: Removal
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- REMOVE COOL AIR INTAKE DUCT SEAL (See REMOVAL )
- REMOVE ENGINE UNDER COVER (See REMOVAL )
- REMOVE FRONT FENDER LINER LH (See REMOVAL )
- REMOVE FRONT FENDER LINER RH (See REMOVAL )
- REMOVE FRONT BUMPER COVER (See REMOVAL )
- REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY
- Disconnect the sensor connector.
- Remove the 3 bolts and sensor.