FixVault
Home › Lexus › 2007 › GS 450h › Repair and Diagnosis › Accessories & Equipment › Entertainment Systems › Audio/Visual › Network Gateway Ecu › Removal

Network Gateway Ecu: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE FRONT CONSOLE UPPER PANEL GARNISH  (See REMOVAL )
  3. REMOVE CONSOLE UPPER PANEL ASSEMBLY  (See REMOVAL )
  4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH  (See REMOVAL )
  5. REMOVE FRONT DOOR SCUFF PLATE RH  (See REMOVAL )
  6. REMOVE FRONT DOOR OPENING TRIM COVER RH  (See REMOVAL )
  7. REMOVE INSTRUMENT SIDE PANEL RH  (See REMOVAL )
  8. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See REMOVAL )
  9. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY  (See REMOVAL )
  10. REMOVE GLOVE COMPARTMENT DOOR SUB-ASSEMBLY  (See REMOVAL )
  11. REMOVE NETWORK GATEWAY ECU 
    1. Disconnect the ECU connector.
    2. Detach the 2 claws and remove the cover.
    3. Remove the ECU.
      Fig 1: Locating Network Gateway ECU
      G05311505Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault