Radio Receiver: Installation

HINT:

A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR STANDARD BOLTS ).

1. INSTALL NO. 2 RADIO BRACKET 
   1. Install the bracket with the 5 bolts.
      Fig 1: Locating No. 2 Radio Bracket Bolts

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL NO. 1 RADIO BRACKET 
   1. Install the bracket with the 5 bolts.
      Fig 2: Locating No. 1 Radio Bracket Bolts

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY 
   1. Connect the connectors.
   2. Insert the multi-display with radio receiver and attach the 2 clips on its backside.
      Fig 3: Inserting Multi-Display With Radio Receiver

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   3. Install the multi-display with radio receiver with the 4 bolts.
      Fig 4: Installing Multi-Display With Radio Receiver With Bolts

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. INSTALL INSTRUMENT PANEL FINISH PANEL END LH  (See INSTALLATION )
5. INSTALL INSTRUMENT PANEL FINISH PANEL END RH  (See INSTALLATION )
6. INSTALL CONSOLE UPPER PANEL ASSEMBLY  (See INSTALLATION )
7. INSTALL FRONT CONSOLE UPPER PANEL GARNISH  (See INSTALLATION )
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
9. PERFORM INITIALIZATION 
   1. Perform initialization (see INITIALIZATION (2006/02-2006/07) ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.