FixVault
Home › Lexus › 2007 › GS 450h › Repair and Diagnosis › Accessories & Equipment › Entertainment Systems › Audio/Visual › Steering Pad Switch Cable › Installation

Steering Pad Switch Cable: Installation

  1. INSTALL STEERING PAD SWITCH LH (See  INSTALLATION   ) 
  2. INSTALL STEERING PAD SWITCH RH (See  INSTALLATION   ) 
  3. INSTALL STEERING PAD  (See INSTALLATION )
  4. INSTALL NO. 2 STEERING WHEEL COVER LOWER 
  5. INSTALL NO. 3 STEERING WHEEL COVER LOWER 
  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  7. INSPECT STEERING PAD  (See INSTALLATION )
  8. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION (2006/02-2006/07) ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
  9. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (see DIAGNOSIS SYSTEM (2006/02-2006/07) ).
About FixVault