Steering Pad Switch: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
REMOVE NO. 2 STEERING WHEEL COVER LOWER (See REMOVAL )
REMOVE NO. 3 STEERING WHEEL COVER LOWER (See REMOVAL )
REMOVE STEERING PAD (See REMOVAL )
REMOVE STEERING PAD SWITCH LH
1. Disconnect the switch connectors.
2. Remove the screw.
3. Detach the clip and 2 claws and remove the switch.
  
  Fig 1: Locating Clip And Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Detach the steering pad switch cable's tabs from the switch, as shown in the illustration.
  
  Fig 2: Detaching Steering Pad Switch Cable Tabs
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Detach the 2 claws and raise the connector cover.
  
  Fig 3: Detaching Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. Hold the connector cover and disconnect the switch from the steering pad switch cable.
  NOTE: When disconnecting the switch, do not pull the switch's wire harness.
  
  Fig 4: Disconnecting Switch From Steering Pad Switch Cable
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE STEERING PAD SWITCH RH
1. Remove the screw.
2. Detach the clip and 2 claws and remove the switch.
  
  Fig 5: Locating Clip And Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Detach the steering pad switch cable's tabs from the switch, as shown in the illustration.
  
  Fig 6: Detaching Steering Pad Switch Cable Tabs
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Detach the 2 claws and raise the connector cover.
  
  Fig 7: Detaching Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Hold the connector cover and disconnect the switch from the steering pad switch cable.
  NOTE: When disconnecting the switch, do not pull the switch's wire harness.
  
  Fig 8: Disconnecting Switch From Steering Pad Switch Cable
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002