FixVault
Home › Lexus › 2007 › GS 450h › Repair and Diagnosis › Body & Frame › Door Locks › Door Lock › Power Door Lock Control System › Data List / Active Test

Data List / Active Test

  1. READ DATA LIST 

    HINT:

    Using the intelligent tester's DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
    2. Turn the power switch ON (IG).
    3. Read the DATA LIST according to the display on the tester.

      Main body ECU RH 

      NORMAL CONDITION CHART

      Item Measurement Item/Display (Range) Normal Condition
      D DOR CTY SW Driver side door courtesy light switch signal/ON or OFF ON: Driver side door is open
      OFF: Driver side door is closed
      P DOR CTY SW Passenger side door courtesy light switch signal/ON or OFF ON: Passenger side door is open
      OFF: Passenger side door is closed
      Rr DOR CTY SW Rear door courtesy light switch signal/ON or OFF ON: Rear door is open
      OFF: Rear door is closed

      Multiplex network master switch 

      NORMAL CONDITION CHART

      Item Measurement Item/Display (Range) Normal Condition
      LOCK POS SW Driver side door lock position switch signal/ON or OFF ON: Driver side door is unlocked
      OFF: Driver side door is locked
      DOOR KEY LOCK Door key-linked lock switch signal/ON or OFF ON: Driver side door key cylinder is turned to lock position
      OFF: Driver side door key cylinder is turned to unlock position
      DOOR KEY UNLOCK Door key-linked unlock switch signal/ON or OFF ON: Driver side door key cylinder is turned to unlock position
      OFF: Driver side door key cylinder is turned to lock position

      Front multiplex network door ECU RH 

      NORMAL CONDITION CHART

      Item Measurement Item/Display (Range) Normal Condition
      LOCK POS SW Passenger side door lock position switch signal/ON or OFF ON: Passenger side door is unlocked
      OFF: Passenger side door is locked

      Rear multiplex network door ECU LH 

      NORMAL CONDITION CHART

      Item Diagnostic Note Normal Condition
      LOCK POS SW Rear door LH side door lock position switch signal/ON or OFF ON: Rear door LH side door is unlocked
      OFF: Rear door LH side door is locked

      Rear multiplex network door ECU RH 

      NORMAL CONDITION CHART

      Item Diagnostic Note Normal Condition
      LOCK POS SW Rear door RH side door lock position switch signal/ON or OFF ON: Rear door RH side door is unlocked
      OFF: Rear door RH side door is locked

      Center airbag sensor 

      NORMAL CONDITION CHART

      Item Diagnostic Note Normal Condition
      P BUCKLE SW Front passenger side buckle switch signal/SET or UNSET SET: Buckle switch is set
      UNSET: Buckle switch is unset
  2. PERFORM ACTIVE TEST 

    HINT:

    Performing the intelligent tester's ACTIVE TEST allows relay, VSV, actuator and other item to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time.

    The DATA LIST can be displayed during the ACTIVE TEST.

    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
    2. Turn the power switch ON (IG).
    3. Perform the ACTIVE TEST according to the display on the tester.

      Front multiplex network door ECU LH 

      FRONT MULTIPLEX NETWORK DOOR ECU LH CHART

      Item Test Details
      DOOR LOCK Operate door lock motor LOCK/UNLOCK

      Front multiplex network door ECU RH 

      FRONT MULTIPLEX NETWORK DOOR ECU RH CHART

      Item Test Details
      DOOR LOCK Operate door lock motor LOCK/UNLOCK

      Rear multiplex network door ECU LH 

      REAR MULTIPLEX NETWORK DOOR ECU LH CHART

      Item Test Details
      DOOR LOCK Operate door lock motor LOCK/UNLOCK

      Rear multiplex network door ECU RH 

      REAR MULTIPLEX NETWORK DOOR ECU RH CHART

      Item Test Details
      DOOR LOCK Operate door lock motor LOCK/UNLOCK
About FixVault