Inspection Procedure

1. Check that the all door entry lock and unlock functions operate normally.

   Result: 

   RESULT CHART
   
   

   Result	Proceed to
   Entry lock and unlock functions do not operate	A
   Entry lock function does not operate	B

   HINT:

   If the entry lock and unlock functions do not operate for a certain door, refer to the PROBLEM SYMPTOMS TABLE .

B:  GO TO step  4

A: GO TO Next Step 

1. Check that the wireless door lock and unlock functions operate normally.

   OK: Wireless door lock and unlock functions operate normally. 

NG:  GO TO WIRELESS DOOR LOCK CONTROL SYSTEM 

OK: GO TO Next Step 

1. After replacing the key with a normal one, check that the entry lock and unlock functions operate normally.

   OK: Entry lock and unlock functions operate normally. 

NG: REPLACE CERTIFICATION ECU 

OK: END (KEY IS DEFECTIVE) 

1. Check that the manual door lock function operates normally.

   OK: Manual door lock function operates normally. 

NG:  GO TO POWER DOOR LOCK CONTROL SYSTEM 

OK: GO TO Next Step 

1. Check the DATA LIST for proper functioning of each door courtesy switch.

   Main body ECU RH: 

   NORMAL CONDITION CHART
   
   

   Item	Measurement Item / Range (Display)	Normal Condition
   D DOR CTY SW	Driver side door courtesy switch / ON or OFF	ON: Courtesy switch is pushed OFF: Courtesy switch is not pushed
   P DOR CTY SW	Front passenger side door courtesy switch / ON or OFF	ON: Courtesy switch is pushed OFF: Courtesy switch is not pushed
   RL DOR CTY SW	Rear LH side door courtesy switch / ON or OFF	ON: Courtesy switch is pushed OFF: Courtesy switch is not pushed
   RR DOR CTY SW	Rear RH side door courtesy switch / ON or OFF	ON: Courtesy switch is pushed OFF: Courtesy switch is not pushed

   Multiplex network rear ECU: 

   NORMAL CONDITION CHART
   
   

   Item	Measurement Item / Range (Display)	Normal Condition
   LUGG COURTESY SW	Luggage compartment door switch / ON or OFF	ON: Courtesy switch is pushed OFF: Courtesy switch is not pushed

   OK: ON (door courtesy switch is pushed) appears on the screen. 

NG:  GO TO LIGHTING SYSTEM

OK: REPLACE MAIN BODY ECU LH