Transmitter Battery: Removal

REMOVE TRANSMITTER BATTERY
NOTE: Take extra care when handling these precision electronic components.
1. Push and hold the release knob in the direction indicated by the arrow in the illustration. Take the mechanical key out of the case.
  
  Fig 1: Holding Release Knob
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Insert a precision screwdriver into the gap, and turn the screwdriver to detach the cover.
  HINT:
  
  Tape the screwdriver tip before use.
  
  Fig 2: Inserting Precision Screwdriver Into Gap
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Insert a precision screwdriver into the gap and remove the battery (lithium battery: CR1632).
  NOTE:
  - Do not push the terminals with your finger.
  - Do not forcibly pry up the battery. The terminals may be damaged.
  - Do not touch the battery with wet hands. Water may cause rust.
  - Do not touch or move any components inside the transmitter. It may interfere with proper operation.
    
    Fig 3: Removing Battery
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002