FixVault
Home › Lexus › 2007 › GS 450h › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel › Fuel Pressure Pulsation Damper › Removal

Fuel Pressure Pulsation Damper: Removal

  1. PRECAUTION (See  REMOVAL   ) 
  2. DISCHARGE FUEL SYSTEM PRESSURE (See  REMOVAL   ) 
  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  4. REMOVE SERVICE PLUG GRIP  (See REMOVAL )
  5. REMOVE COOL AIR INTAKE DUCT SEAL  (See REMOVAL )
  6. REMOVE ENGINE ROOM SIDE COVER LH  (See REMOVAL )
  7. REMOVE ENGINE ROOM SIDE COVER RH  (See REMOVAL )
  8. REMOVE FRONT UPPER FENDER PROTECTOR LH  (See REMOVAL )
  9. REMOVE FRONT UPPER FENDER PROTECTOR RH  (See REMOVAL )
  10. REMOVE FRONT FENDER TO COWL SIDE SEAL LH  (See REMOVAL )
  11. REMOVE FRONT FENDER TO COWL SIDE SEAL RH  (See REMOVAL )
  12. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH  (See REMOVAL )
  13. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH  (See REMOVAL )
  14. REMOVE COWL TOP VENTILATION LOUVER SUB-ASSEMBLY 
  15. REMOVE V-BANK COVER SUB-ASSEMBLY  (See REMOVAL )
  16. DISCONNECT NO. 2 VENTILATION HOSE  (See REMOVAL )
  17. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE  (See REMOVAL )
  18. REMOVE FUEL PRESSURE PULSATION DAMPER 
    1. Using SST, remove the fuel pressure pulsation damper and 2 gaskets, and disconnect the fuel tube from the fuel pump.

      SST 09612-24014 (09617-24011) 

      Fig 1: Removing Fuel Pressure Pulsation Damper
      G05286981Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault