Inspection Procedure

CHECK PANEL SWITCH
1. Check for foreign matter around the switch that might prevent operation.
  OK: No foreign matter is found.
  
  NG: REMOVE ANY FOREIGN MATTER
  
  OK: Go to Next Step
CHECK PANEL SWITCH (DISPLAY CHECK MODE)
1. Enter the DISPLAY CHECK MODE (Panel Switch Check Mode)
2. Operate the abnormal switch and check if the switch name and status are correctly displayed.
  OK: The switch name and status are correctly displayed as operated.
  
  Fig 1: Identifying Tester Display - Panel Switch Check Mode
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  NG: PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN PROBLEM SYMPTOMS TABLE
  
  OK: REPLACE MULTI-DISPLAY