FixVault

Data List/Active Test

  1. READ DATA LIST 

    HINT:

    Using the intelligent tester's DATA LIST allows switch, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

    1. Connect the intelligent tester with CAN VIM to the DLC3.
    2. Turn the ignition switch ON.
    3. Read the DATA LIST.

      BODY (Body ECU): 

      DATA LIST TABLE

      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      KEY UNLK WRN SW Unlock warning switch signal/ON or OFF ON: Key is in ignition key cylinder
      OFF: No key is in ignition key cylinder
      -
      D DOR CTY SW Driver side door courtesy switch signal/ON or OFF ON: Driver side door is open
      OFF: Driver side door is closed
      -