FixVault
Home › Lexus › 2007 › GX 470 › Repair and Diagnosis › Body & Frame › Door Locks › Door Lock › Power Door Lock Control System › Data List/Active Test

Data List/Active Test

  1. READ DATA LIST 

    HINT:

    Using the intelligent tester's DATA LIST allows switch, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

    1. Connect the intelligent tester with CAN VIM to the DLC3.
    2. Turn the ignition switch ON.
    3. Read the DATA LIST according to the display on the tester.

      BODY (Body ECU): 

      DATA LIST TABLE

      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      KEY UNLK WRN SW Unlock warning switch signal / ON or OFF ON: Key is in ignition key cylinder
      OFF: No key is in ignition key cylinder      		 -
      D DOR CTY SW Driver side door courtesy switch signal / ON or OFF ON: Driver side door is open
      OFF: Driver side door is closed      		 -
      P DOR CYT SW Passenger side door courtesy switch signal / ON or OFF ON: Passenger side door is open
      OFF: Passenger side door is closed      		 -
      Rr DOR CTY SW Rear door courtesy switch signal / ON or OFF ON: Right or left rear door is open
      OFF: Right and left rear doors are closed      		 -
      P LOCK POS SW Passenger side door lock position switch signal / ON or OFF ON: Passenger side door is lock is in UNLOCK position
      OFF: Passenger side door lock is in LOCK position      		 -
      D/L SW-LOCK Manual door lock switch- LOCK signal / ON or OFF ON: Manual door lock switch is in LOCK position
      OFF: Manual door lock switch is in neutral position      		 -
      D/L SW-UNLOCK Manual door lock switch UNLOCK signal / ON or OFF ON: Manual door lock switch is in UNLOCK position
      OFF: Manual door lock switch is in neutral position      		 -
      DOR KEY SW-LOCK Key operation door lock switch signal / ON or OFF ON: Key operation door lock switch is in lock position
      OFF: Key operation door lock switch is in neutral position      		 -
      D DOR KEY SW-UL Key operation driver door unlock switch signal / ON or OFF ON: Driver key operation door lock switch is in unlock position
      OFF: Driver key operation door lock switch is in neutral position      		 -
      OPEN DOOR WARN Door courtesy switch signal / ON or OFF ON: Either door is open
      OFF: All doors are closed      		 -

      D-DOOR (Driver Side Door ECU): 

      DATA LIST TABLE

      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      LOCK POS SW Driver door lock position switch signal / ON or OFF ON: Driver side door lock is in unlock position
      OFF: Driver side door lock is in lock position      		 -
  2. ACTIVE TEST 

    HINT:

    Performing the ACTIVE TEST using the intelligent tester allows the relay, VSV, actuator and so on to operate without parts removal. Performing the ACTIVE TEST as a first step of troubleshooting is one of the methods to shorten labor time.

    It is possible to display the DATA LIST during the ACTIVE TEST.

    1. Connect the intelligent tester to the DLC3.
    2. Turn the ignition switch ON.
    3. According to the display on the tester, perform the ACTIVE TEST.

      BODY (Body ECU): 

      ACTIVE TEST TABLE

      Tester Display Test Part Control Range Diagnostic Note
      OPN DOR WRN LGT Door warning light ON / OFF (All doors are closed) -
      DOOR LOCK Door lock motor for all doors OFF/LOCK/UNLOCK -
About FixVault