Data List/Active Test

HINT:

The wireless door lock control data list can be displayed while the intelligent tester is connected to the DLC3 with the ignition switch in the ON position. Follow the prompts on the tester screen to access the DATA LIST.

1. Connect the intelligent tester to the DLC3.
2. Turn the ignition switch ON.
3. Read the DATA LIST according to the display on the tester.

   BODY (Body ECU): 

   DATA LIST TABLE
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   KEY UNLK WRN SW	Unlock warning switch / ON or OFF	ON: Ignition key is inserted OFF: Ignition key is not inserted	-

HINT:

Performing the ACTIVE TEST using the intelligent tester allows components such as the relay, VSV and actuator to operate without removing parts. Performing the ACTIVE TEST as the first step in troubleshooting is one way to shorten labor time.

It is possible to display the DATA LIST during the ACTIVE TEST.

1. Connect the intelligent tester to the DLC3.
2. Turn the ignition switch to the ON position.
3. According to the display on the tester, preform the ACTIVE TEST.

   HINT:

   The ignition switch must be turned to the ON position to proceed with the ACTIVE TEST using the intelligent tester.

   BODY (Body ECU): 

   ACTIVE TEST TABLE
   
   

   Tester Display	Test Part	Control Range	Diagnostic Note
   BUZZ CONT SOUND	Test Detail: Turns wireless buzzer Vehicle Condition: Sets wireless buzzer volume at MAX	ON/OFF	-
   BUZZ RESP SOUND	Test Detail: Turns wireless buzzer Vehicle Condition: Sets wireless buzzer volume at MAX	ON/OFF	-