How To Proceed With Troubleshooting

HINT:

Step  3,  6,  9,  12:

Diagnostic steps permitting use of the intelligent tester.

1. VEHICLE BROUGHT TO WORKSHOP 

   NEXT: Go to next step 

2. CUSTOMER PROBLEM ANALYSIS 

   NEXT: Go to next step 

3. CHECK AND CLEAR DTC 
   1. Check for a DTC (See DTC CHECK/CLEAR  ).

   NEXT: Go to next step 

4. PROBLEM SYMPTOM CONFIRMATION 

   Symptom Does Not Occur (Go to step   5 ) 

   Symptom Occurs (Go to step   6 ) 

   NEXT: Go to next step 

5. SYMPTOM SIMULATION 

   NEXT: Go to next step 

6. CHECK DTC 
   1. Check for a DTC (See DTC CHECK/CLEAR  ).

   Normal System Code OUTPUT (Go to step   7 ) 

   DTC OUTPUT (Go to step   8 ) 

7. PROBLEM SYMPTOMS TABLE 
   1. Refer to PROBLEM SYMPTOMS TABLE .

   NEXT: Go to next step 

8. DTC TABLE 
   1. Refer to DIAGNOSTIC TROUBLE CODE TABLE .

   NEXT: Go to next step 

9. CIRCUIT INSPECTION 
   1. Inspect the circuit (See INSPECTION PROCEDURE  and INSPECTION PROCEDURE  ).

   NEXT: Go to next step 

10. IDENTIFICATION OF PROBLEM 

    NEXT: Go to next step 

11. REPAIR OR REPLACE 

    NEXT: Go to next step 

12. CONFIRMATION TEST 

    NEXT: END