Entry Lock And Unlock Switch: Removal

REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG (See DISASSEMBLY )
REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (See DISASSEMBLY )
REMOVE COURTESY LIGHT ASSEMBLY (See DISASSEMBLY )
REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY (See DISASSEMBLY )
REMOVE FRONT DOOR TRIM COVER (See DISASSEMBLY )
REMOVE FRONT DOOR SERVICE HOLE COVER (See DISASSEMBLY )
REMOVE FRONT DOOR GLASS SUB-ASSEMBLY (See DISASSEMBLY )
REMOVE FRONT DOOR OUTSIDE HANDLE COVER (See DISASSEMBLY )
REMOVE FRONT DOOR OUTSIDE HANDLE SUB-ASSEMBLY
1. Remove the hole plug.
2. Using a "torx" socket wrench (T30), loosen the screw and remove the front door outside handle cover and the door lock key cylinder as a unit.
  HINT:
  
  The screw cannot be removed because it is integrated into the front door outside handle frame sub-assembly.
  
  Fig 1: Identifying Front Door Outside Handle Cover And Door Lock Key Cylinder
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Disconnect the connector.
4. Using a "torx" socket wrench (T30), loosen the screw.
  
  Fig 2: Identifying Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Remove the front door outside handle sub-assembly as shown in the illustration.
  
  Fig 3: Identifying Front Door Outside Handle Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002