Rear Axle Hub Bolt: Replacement

1. REMOVE REAR WHEEL 
2. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY (See Step 7 in  REMOVAL  ) 
3. REMOVE REAR DISC (See Step 9 in  DISASSEMBLY  ) 
4. REMOVE REAR AXLE HUB BOLT 
   1. Using SST, remove the rear axle hub bolt.

   SST 09628-10011 

   NOTE: Do not damage the threads of the hub bolt.
   Fig 1: Removing Rear Axle Hub Bolt Using SST

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. INSTALL REAR AXLE HUB BOLT 
   1. Install a washer and nut to a new bolt as shown in Fig 2 .
   2. Using a screwdriver or equivalent to hold the rear axle hub, install the rear axle hub bolt by tightening the nut.
   NOTE: Do not damage the threads of the hub bolt.
6. INSTALL REAR DISC (See  REASSEMBLY  ) 
7. ADJUST PARKING BRAKE SHOE CLEARANCE (See  ADJUSTMENT  ) 
8. INSTALL REAR WHEEL 

Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf) 

Fig 2: Installing Washer & Nut To Bolt

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002