FixVault
Home › Lexus › 2007 › IS 250 AWD › Repair and Diagnosis › External Pages › Different car › Section 14 (Automatic Transaxle) › Park / Neutral Position Switch › Inspection

Park / Neutral Position Switch: Inspection

WARNING: This page is about a different car, the 2007 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      PARK/NEUTRAL POSITION SWITCH ASSEMBLY STANDARD RESISTANCE SPECIFICATIONS

      Shift Position Taster Connection Specified Condition
      P 2 - 6 and 4 - 5 Below 1 Ω
      Except P 2 - 6 and 4 - 5 10 kΩ or higher
      R 2 - 3 Below 1 Ω
      Except R 2 - 3 10 kΩ or higher
      N 2 - 9 and 4 - 5 Below 1 Ω
      Except N 2 - 9 and 4 - 5 10 kΩ or higher
      D, S, "+" and "-" 2 - 7 Below 1 Ω
      Except D, S, "+" and "-" 2 - 7 10 kΩ or higher
      Fig 1: Identifying Park/Neutral Position Switch Connector Terminal
      G05316969Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the resistance value is not as specified, replace the park/neutral position switch assembly.

About FixVault