FixVault
Home › Lexus › 2007 › IS 350 › Repair and Diagnosis › Accessories & Equipment › Headlights › Lighting › Console Box Light › Inspection

Console Box Light: Inspection

  1. INSPECT CONSOLE BOX LIGHT 
    1. Remove the console box light.
    2. Measure the voltage according to the value (s) in the table below.

      Standard voltage 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Tester Connection Condition Specified Condition
      J46-2 - J46-1 Console box is opened 10 to 14 V
      J46-2 - J46-1 Console box is closed Below 1 V
      Fig 1: Identifying J46 Console Box Light Connector Terminals
      G05320516Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the result is not as specified, repair or replace the wire harness or connector.

    3. Connect the (+) lead from the battery to terminal 2 and the (-) lead to terminal 1.
    4. Check that the console box light comes on.

      OK: Comes on 

      If the result is not as specified, replace the console box light.

      Fig 2: Identifying J46 Console Box Light Connector Terminals
      G05320517Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault