High Intensity Discharge Headlight Bulb: Installation

INSTALL DISCHARGE HEADLIGHT BULB
1. Install the discharge headlight bulb.
  NOTE: After the discharge headlight bulb is replaced, make sure that it comes on. Then, reinstall all the parts that were removed to replace the bulb.
2. Install a new headlight gasket.
  NOTE: After the headlight gasket is removed, be sure to replace it with a new one. Failure to do this may cause water ingress.
  
  Fig 1: Identifying Discharge Headlight Bulb
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL WASHER HOSE
1. Install the washer hose with the bolt.
  
  Fig 2: Identifying Washer Hose And Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
INSTALL ENGINE ROOM SIDE COVER (See INSTALLATION )
INSTALL COOL AIR INTAKE DUCT SEAL
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
Some systems need initialization after reconnecting the cable to the negative battery terminal (See INITIALIZATION ).