FixVault
Home › Lexus › 2007 › IS 350 › Repair and Diagnosis › Body & Frame › Door Locks › Door Lock › Wireless Door Lock Control System › Data List / Active Test

Data List / Active Test

  1. DATA LIST 

    HINT:

    Using the intelligent tester DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to shorten labor time.

    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
    2. Turn the engine switch on (IG).
    3. Enter the following menus: DIAGNOSIS / OBD/ MOBD / BODY / DATA LIST.
    4. Read the DATA LIST according to the display on the tester.

      BODY (Main body ECU RH): 

      BODY (MAIN BODY ECU RH)

      Item Measurement Item/Display (Range) Normal Condition Diagnostic Note
      WIRELESS OPER Wireless door lock control function / ON or OFF ON: Operating
      OFF: Not operating      		 -
      HAZARD ANS BACK Hazard answer-back of wireless / ON or OFF ON: Operating
      OFF: Not operating      		 -
      OPEN DOOR WARN Open door warning / ON or OFF ON: Operating
      OFF: Not operating      		 -
      AUTO LOCK DELAY Automatic lock time / 60 s or 30 s 60 s: 60 seconds
      30 s: 30 seconds      		 -
      TRUNK LID OPER Luggage compartment door open function type /1 TIME/2 TIME/ 0.8 s PR/ OFF 1 TIME: Luggage compartment door opens when LUGGAGE OPEN switch is pressed once
      2 TIME: Luggage compartment door opens when LUGGAGE OPEN switch is pressed twice
      0.8 s PR: Luggage compartment door opens when LUGGAGE OPEN switch is pressed and held down for 0.8 seconds.
      OFF: Not operating      		 -
      UNLOCK/2 OPER 2 times operation of wireless unlock / ON or OFF ON: All doors unlock when UNLOCK is pressed twice
      OFF: All doors unlock when UNLOCK is pressed once      		 -
      ALARM FUNCTION Panic function / ON or OFF ON: Operating
      OFF: Not operating      		 -
      WIRES BUZZ RESP Wireless door lock buzzer response / ON or OFF ON: Operating
      OFF: Not operating      		 -
  2. ACTIVE TEST 

    HINT:

    Performing the intelligent tester ACTIVE TEST allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to shorten the labor time. The DATA LIST can be displayed during the ACTIVE TEST.

    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
    2. Turn the engine switch on (IG).
    3. Enter the following menus: DIAGNOSIS / OBD/ MOBD / BODY / ACTIVE TEST.
    4. Perform the ACTIVE TEST according to the display on the tester.

      BODY (Main body ECU RH): 

      BODY (MAIN BODY ECU RH) CHART

      Item Tester Detail Diagnostic Note
      HAZARD Turns the turn signal flasher relay ON / OFF Observe headlight and rear combination light for correct operation
      BUZZ RESP SOUND Wireless door lock buzzer ON / OFF -
      TRUNK/BDOR OPEN Turns luggage compartment door opener motor ON / OFF Observe luggage compartment door
About FixVault