FixVault
Home › Lexus › 2007 › IS 350 › Repair and Diagnosis › Brakes › Traction Control › Brake Control › Yaw Rate And Acceleration Sensor › Inspection

Yaw Rate And Acceleration Sensor: Inspection

  1. INSPECT YAW RATE AND ACCELERATION SENSOR 
    1. Inspect the yaw rate and acceleration sensor. If any of the following occurs, replace the yaw rate and acceleration sensor with a new one.
      • The surface of the yaw rate and acceleration sensor is cracked, dented, or chipped off.
      • The connector or wire harness is scratched, cracked, or damaged.
      • The yaw rate and acceleration sensor has been dropped.
About FixVault