FixVault
Home › Lexus › 2007 › IS 350 › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt › Seat Belt Control Ecu › Removal

Seat Belt Control Ecu: Removal

  1. REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM COVER 
  2. REMOVE SPARE WHEEL COVER 
  3. REMOVE DECK SIDE TRIM BOX LH 
  4. REMOVE DECK SIDE TRIM BOX RH 
  5. REMOVE ROPE HOOK ASSEMBLY (See  REMOVAL  ) 
  6. REMOVE REAR LUGGAGE COMPARTMENT TRIM COVER (See  REMOVAL  ) 
  7. REMOVE NO. 2 ROOM LIGHT ASSEMBLY (See  REMOVAL  ) 
  8. REMOVE ROPE HOOK (See  REMOVAL  ) 
  9. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER (See  REMOVAL  ) 
  10. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (See  REMOVAL  ) 
  11. REMOVE SIDE LUGGAGE COMPARTMENT TRIM COVER LH (See  REMOVAL  ) 
  12. REMOVE SEAT BELT CONTROL ECU 
    1. Disconnect the connectors.
    2. Remove the 3 nuts and remove the seat belt control ECU and the clearance warning ECU as a unit.
      Fig 1: Identifying Seat Belt Control ECU Connector
      G05320248Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the 2 nuts and seat belt control ECU.
      Fig 2: Identifying Seat Belt Control ECU Connector With Nuts
      G05320249Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault