Headlight Assembly: Installation

INSTALL HEADLIGHT ASSEMBLY LH (w/ Headlight Cleaner System)
1. Attach the clamp.
2. Connect the connectors.
3. Install the headlight LH with the 3 bolts.
  
  Fig 1: Identifying Headlight LH Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Connect the headlight cleaner hose.
INSTALL HEADLIGHT ASSEMBLY LH (w/o Headlight Cleaner System)
1. Attach the clamp.
2. Connect the connectors.
3. Install the headlight LH with the 3 bolts.
  
  Fig 2: Identifying Headlight LH Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT BUMPER COVER (See INSTALLATION )
INSTALL FRONT WHEEL OPENING EXTENSION PAD LH (See INSTALLATION )
INSTALL FRONT WHEEL OPENING EXTENSION PAD RH (See INSTALLATION )
INSTALL RADIATOR GRILLE ASSEMBLY (See INSTALLATION )
INSTALL FRONT FENDER WHEEL OPENING MOULDING LH (See INSTALLATION )
INSTALL FRONT FENDER WHEEL OPENING MOULDING RH (See INSTALLATION )
CHECK HEADLIGHT (See ADJUSTMENT )
ADJUST HEADLIGHT (See ADJUSTMENT )
INSTALL COOL AIR INTAKE DUCT SEAL (See INSTALLATION )
INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY (See INSTALLATION )
INSTALL ENGINE ROOM SIDE COVER (See INSTALLATION )
INSTALL ENGINE ROOM SIDE COVER LH (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
INSTALL COWL TOP VENTILATOR LOUVER RH (See INSTALLATION )
PERFORM INITIALIZATION
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
VEHICLE PREPARATION FOR HEADLIGHT AIMING ADJUSTMENT (See ADJUSTMENT )
PREPARATION FOR HEADLIGHT AIMING (Using a screen) (See ADJUSTMENT )
HEADLIGHT AIMING INSPECTION (See ADJUSTMENT )
HEADLIGHT AIMING ADJUSTMENT (See ADJUSTMENT )
VEHICLE PREPARATION FOR FOG LIGHT AIMING ADJUSTMENT (See ADJUSTMENT )
PREPARATION FOR FOG LIGHT AIMING (See ADJUSTMENT )
FOG LIGHT AIMING INSPECTION (See ADJUSTMENT )
FOG LIGHT AIMING ADJUSTMENT (See ADJUSTMENT )