FixVault
Home › Lexus › 2007 › LS 460 › Repair and Diagnosis › Accessories & Equipment › Headlights › Lighting › Lighting System › Customize Parameters

Customize Parameters

  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER OR TECHSTREAM (REFERENCE) 
    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first male sure that the function is set to the default setting.
    1. Connect the intelligent tester or Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the tester on.
    4. Enter the following menus:
      1. Intelligent tester - Select: CUSTOMIZE /
      2. Techstream - Select: Customize Setting /
    5. Select the setting by referring to the table below.
      1. Intelligent tester

        ILLUMINATE ENTR: 

        INTELLIGENT TESTER - ILLUMINATE ENTR

        Display Default Contents Setting
        I/L ON / ACC OFF ON Function to light the interior light when the engine switch is operated from on (IG or ACC) to off ON / OFF
        LIGHTING TIME 15s Function to change the lighting time after closing the door. (It will quickly fade out in case of turning the engine switch on (IG)) 7.5s/15s/30s
        LIGHT CONTROL ON Function to light up door inside handle light when the engine switch is on (IG) and shift position is not P ON / OFF
        I/L ON / UNLOCK ON Function to light the interior light, etc. when the door is unlocked with a transmitter, door key or door lock control switch. ON / OFF
        MIRR F/L APRCHD ON Door mirror foot light (when approaching vehicle) ON / OFF
        MIRR F/L UNLOCK ON Door mirror foot light (when unlocking doors) ON / OFF
        MIRR F/L MSTR SW ON Door mirror foot light (when manually unlocking doors) ON / OFF
        S/B BKL OPN/DOR ON Seat belt buckle illumination (when door is open) ON / OFF
        S/B BKL ACC/OFF ON Seat belt buckle illumination (when electrical accessories are OFF) ON / OFF
        MIRR F/L TIME 15s Door mirror foot light illumination duration 0s / 7.5s / 15s / 30s
        ROOM/LGT APRCHD ON Dome light illumination (when approaching vehicle) ON / OFF
        INSIDE FOOT/LGT ON Interior foot light illumination ON / OFF
        CONSOLE LIGHT ON Center console spot light ON / OFF

        LIGHT CONTROL: 

        INTELLIGENT TESTER - LIGHT CONTROL

        Display Default Contents Setting
        LIGHT OFF DELAY 30s Function to keep on lighting the headlight for a certain period of time after closing all the doors with the engine switch turned from on (IG) to off under the condition that the light control switch is at HEAD or AUTO with the headlight ON OFF / 30s / 60s / 90s
        SENSITIVITY NORMAL Function to adjust the sensitivity of lighting illumination*1. LIGHT2 / LIGHT1 / NORMAL / DARK1/DARK2
        DISP EX ON SEN NORMAL Changes brightness when lowering lights such as combination meter indicator light, A/C indicator light, and clock light. Refer to the Fig 2. LIGHT2 / LIGHT1 / NORMAL / DARK1/DARK2
        DISP EX OFF SEN NORMAL Changes brightness when canceling lowering lights such as combination meter indicator light, A/C indicator light, and clock light. Refer to the Fig 3. LIGHT2 / LIGHT1 / NORMAL / DARK1/DARK2
        DRL FUNCTION ON DRL control ON/OFF

        HINT:

        The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

        Illustration*1: 

        Fig 1: Lighting Brightness - Illustration*1
        G04944608Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        Illustration*2: 

        Fig 2: Brightness Of Lowering Light - Illustration*2
        G04944609Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        Illustration*3: 

        Fig 3: Brightness When Cancelling Lowering Of Light - Illustration*3
        G04944610Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      2. Techstream

        Illuminated Entry: 

        TECHSTREAM - ILLUMINATED ENTRY

        Display Default Contents Setting
        I/L when ACC OFF ON Function to light the interior light when the engine switch is operated from on (IG or ACC) to off ON / OFF
        Lighting Time 15s Function to change the lighting time after closing the door. (It will quickly fade out in case of turning the engine switch on (IG)) 7.5s/15s/30s
        Light Control ON Function to light up door inside handle light when the engine switch is on (IG) and shift position is not P ON / OFF
        I/L ON W/Door Key Unlock ON Function to light the interior light, etc. when the door is unlocked with a transmitter, door key or door lock control switch. ON / OFF
        Mirr-Foot-Lgt Approached ON Door mirror foot light (when approaching vehicle) ON / OFF
        Mirr-Foot-Lgt Unlocked ON Door mirror foot light (when unlocking doors) ON / OFF
        Mirr-Foot-Lgt w/Master SW ON Door mirror foot light (when manually unlocking doors) ON / OFF
        S-Belt-Bkl-Lgt/Door Open ON Seat belt buckle illumination (when door is open) ON / OFF
        S-Belt-Bkl-Lgt/ACC OFF ON Seat belt buckle illumination (when electrical accessories are OFF) ON / OFF
        Mirror Foot Light Time 15s Door mirror foot light illumination duration Os/ 7.5s /15s /30s
        Room Light when Aprchd ON Dome light illumination (when approaching vehicle) ON / OFF
        Inside Foot Light ON Interior foot light illumination ON / OFF
        Center Console Spot Light ON Center console spot light ON / OFF

        Light Control: 

        TECHSTREAM - LIGHT CONTROL

        Display Default Contents Setting
        Light Auto OFF Delay 30s Function to keep on lighting the headlight for a certain period of time after closing all the doors with the engine switch turned from on (IG) to off under the condition that the light control switch is at HEAD or AUTO with the headlight ON OFF / 30s / 60s / 90s
        Sensitivity NORMAL Function to adjust the sensitivity of lighting illumination*1. Light2 / Light1 / Normal / Dark1 / Dark2
        Disp Ex ON Sen NORMAL Changes brightness when lowering lights such as combination meter indicator light, A/C indicator light, and clock light. Refer to the Fig 5. LIGHT2 / LIGHT1 / NORMAL / DARK1/DARK2
        Disp Ex OFF Sen NORMAL Changes brightness when canceling lowering lights such as combination meter indicator light, A/C indicator light, and clock light. Refer to the Fig 6. LIGHT2 / LIGHT1 / NORMAL / DARK1/DARK2
        DRL Function ON DRL control ON / OFF

        HINT:

        The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

        Illustration*1: 

        Fig 4: Lighting Brightness - Illustration*1
        G04944611Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        Illustration*2: 

        Fig 5: Brightness Of Lowering Lights - Illustration*2
        G04944612Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        Illustration*3: 

        Fig 6: Brightness When Cancelling Lowering Of Lights - Illustration*3
        G04944613Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. Door linked map light and personal light illumination control 

    Mode 1: When door is opened, map light of opened door illuminates, or personal light illuminates

    Mode 2: When door is opened, all map lights and personal lights illuminate

    Mode 3: Map lights and personal lights are not linked to doors

    1. To change modes, press the map light assembly DOOR and ON switch simultaneously, and then turn the engine switch from off to on (IG). Each engine switch off to on (IG) operation will change the mode (Mode 1 → Mode 2 → Mode 3 → Mode 1).

      HINT:

      After changing modes, the map light responds by blinking as follows: Mode 1: once; Mode 2: twice; Mode 3: three times.

About FixVault