MIRROR SWITCH: Component Function Check
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUNCTION
- Select "MIR CON SW-UP/DN", "MIR CON SW-RH/LH" in "Data monitor" mode with CONSULT-III.
- Check tilt switch signal under the following conditions.
MONITOR ITEM CONDITION CHART
| Monitor item | Condition | Status | |
|---|---|---|---|
| MIR CON SW-UP/DN | Mirror switch (up/down) | Operate | ON |
| Release | OFF | ||
| MIR CON SW-RH/LH | Mirror switch (right/left) | Operate | ON |
| Release | OFF | ||
Is the indication normal?
YES: Inspection End.
NO: Perform diagnosis procedure. Refer to "MIRROR SWITCH: DIAGNOSIS PROCEDURE ".