DTC U1005 Lost Communication with Electronically Controlled Brake Gateway Module: Description
If 2 or more DTCs are output during the DTC check, one side of the CAN branch wire may be open. (One side of the CANH [branch wire]/CANL [branch wire] of the ECU and/or sensor is open.)
PROBLEM SYMPTOM CHART
| DTC Code |
Symptom |
Trouble Area |
| U1005 |
Lost communication with electronically controlled brake gateway module |
- Steering bus circuit
- Skid control ECU branch wire or connector
- Driving support ECU branch wire or connector
- Yaw rate sensor branch wire or connector
- Steering angle sensor branch wire or connector
- Seat belt control ECU branch wire or connector
- Suspension control ECU branch wire or connector
- Steering control ECU branch wire or connector
- ECM main wire or connector
- Power steering ECU main wire or connector
- ECM
- Power steering ECU
- Skid control ECU
- Driving support ECU*1
- Yaw rate sensor
- Steering angle sensor
- Seat belt control ECU*2
- Suspension control ECU*3
- Steering control ECU*4
- No. 1 junction connector
- No. 2 junction connector
- No. 4 junction connector
- No. 5 junction connector
|
HINT:
*1: w/ Dynamic Radar Cruise Control System or Pre-collision System
*2: w/ Pre-collision System
*3: w/ Air Suspension System
*4: w/ Variable Gear Ratio Steering System |