Security Indicator Light Assembly: Inspection
- INSPECT INDICATOR LIGHT ASSEMBLY
- Check operation of the indicator light.
OK
INDICATOR LIGHT ASSEMBLYMeasurement Condition Specified Condition Battery positive (+) → Terminal 2 (LP2*1, LP1*2)
Battery positive (+) → Terminal 1 (E)Illuminates NOTE:- If the positive (+) lead and the negative (-) lead are incorrectly connected, the security indicator will not turn on.
- A voltage of more than 12 V will damage the security indicator.
- If the voltage is too low, the security indicator will not turn on.
If the result is not as specified, replace the indicator light.
- Check operation of the indicator light.