FixVault
Home › Lexus › 2007 › LS 460L › Repair and Diagnosis › Body & Frame › Exterior/Interior Trim › Interior › Rear Sunshade System › Customize Parameters

Customize Parameters

  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER OR TECHSTREAM (REFERENCE) 
    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.
    1. Connect the intelligent tester or Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the tester on.
    4. Enter the following menus:
      1. Intelligent tester - Select: CUSTOMIZE /
      2. Techstream - Select: Customize Setting /
    5. Select the setting by referring to the table below.
      1. Intelligent tester

        OTHERS 

        INTELLIGENT TESTER CUSTOMIZE PARAMETERS - OTHERS

        System Default Contents Setting
        R-SHADE DELAY T 0.7 s Function to adjust reverse-linked sunshade lowering function's response time 0.7 s / 1.2 s / 0.9 s / 0.0 s
        R-SHADE REVERSE AVAIL Reverse linked function AVAIL or NOT AVL
      2. Techstream

        Others 

        TECHSTREAM CUSTOMIZE PARAMETERS - OTHERS

        System Default Contents Setting
        Rear Shade Delay Time 0.7 s Function to adjust reverse-linked sunshade lowering function's response time 0.7 s / 1.2 s / 0.9 s / 0.0 s
        R-pos to Rear Sun Shade COM ON Reverse linked function ON or OFF
About FixVault