FixVault
Home › Lexus › 2007 › LS 460L › Repair and Diagnosis › External Pages › Different car › Section 521 (Lighting System) › Headlamp (For USA) › CONSULT-II Function (BCM) › Data Monitor › Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "HEAD LAMP" on "SELECT TEST ITEM" screen.
  2. Touch "DATA MONITOR" on "SELECT DIAG MODE" screen.
  3. Touch either "ALL SIGNALS" or "SELECTION FROM MENU" on the "SELECT MONITOR ITEM" screen.
    SIGNALS REFERENCE CHART

    ALL SIGNALS Monitors all the signals.
    SELECTION FROM MENU Selects and monitors individual signal.
  4. Touch "START".
  5. When "SELECTION FROM MENU" is selected, touch individual items to be monitored. When "ALL SIGNALS" is selected, all the items will be monitored.
  6. Touch "RECORD" while monitoring, then the status of the monitored item can be recorded. To stop recording, touch "STOP".


  1. Touch "DATA MONITOR" on "SELECT DIAG MODE" screen.
  2. Touch "ALL SIGNALS", "MAIN SIGNALS" or "SELECTION FROM MENU" on the "SELECT MONITOR ITEM" screen.
    SIGNALS REFERENCE CHART

    ALL SIGNALS All items will be monitored.
    MAIN SIGNALS Monitor the predetermined item.
    SELECTION FROM MENU Select any item for monitoring.
  3. Touch "START".
  4. Touch the required monitoring item on "SELECTION FROM MENU". In "ALL SIGNALS", all items are monitored. In "MAIN SIGNALS", predetermined items are monitored.
  5. Touch "RECORD" while monitoring to record the status of the item being monitored. To stop recording, touch "STOP".
About FixVault