Component Function Check
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUNCTION
- Select "LIFT FR SW-UP", "LIFT FR SW-DN" in "DATA MONITOR" mode with CONSULT-III.
- Check lifting switch (front) signal under the following conditions.
MONITOR ITEM CONDITION CHART
| Monitor item | Condition | Status | |
|---|---|---|---|
| LIFT FR SW-UP | Lifting switch front (up) | Operate | ON |
| Release | OFF | ||
| LIFT FR SW-DN | Lifting switch front (down) | Operate | ON |
| Release | OFF | ||
Is the indication normal?
YES: Inspection End.
NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".