DRIVER SIDE: Component Function Check
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUNCTION
- Select "MIR/SEN LH U-D", "MIR/SEN LH R-L" in "Data monitor" with CONSULT-III.
- Check mirror sensor (driver side) signal under the following condition.
MONITOR ITEM CONDITION CHART
| Monitor item | Condition | Value | |
|---|---|---|---|
| MIR/SEN LH U-D | Door mirror LH | Close to peak | 3.4V |
| Close to valley | 0.6V | ||
| MIR/SEN LH R-L | Close to right edge | 3.4V | |
| Close to left edge | 0.6V | ||
Is the indication normal?
YES: Inspection End.
NO: Perform diagnosis procedure. Refer to "DRIVER SIDE: DIAGNOSIS PROCEDURE ".