Component Function Check
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUNCTION
- Select "TILT SW-UP", "TILT SW-DOWN" in "Data monitor" mode with CONSULT-III.
- Check tilt switch signal under the following conditions.
MONITOR ITEM CONDITION CHART
| Monitor item | Condition | Status | |
|---|---|---|---|
| TILT SW-UP | Tilt switch (up) | Operate | ON |
| Release | OFF | ||
| TILT SW-DN | Tilt switch (down) | Operate | ON |
| Release | OFF | ||
Is the indication normal?
YES: Inspection End.
NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".