3. Remote Keyless Entry Receiver Ground Circuit

WARNING: This page is about a different car, the 2004 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect remote keyless entry receiver connector.
Check continuity between remote keyless entry receiver connector M120 terminal 1 and ground.
1. 1 (P) - Ground: Continuity should exist

OK or NG

OK >> Replace remote keyless entry receiver.
NG >> GO TO 4.

Fig 1: Checking Continuity

G00341767

Courtesy of NISSAN MOTOR CO., U.S.A.