Component Inspection

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK THROTTLE CONTROL MOTOR

Turn ignition switch OFF.
Disconnect electric throttle control actuator harness connector.

Check resistance between electric throttle control actuator terminals as per the following.

RESISTANCE REFERENCE

Terminals	Resistance
5 and 6	Approx. 1 - 15 Ω [at 25°C (77°F)]

Fig 1: Checking Resistance Between Electric Throttle Control Actuator Terminals

Courtesy of NISSAN MOTOR CO., U.S.A.

Is the inspection result normal?

YES: INSPECTION END

NO: GO TO 2.

REPLACE ELECTRIC THROTTLE CONTROL ACTUATOR
1. Replace electric throttle control actuator.
2. Go to "SPECIAL REPAIR REQUIREMENT ".
: INSPECTION END